A Hybrid Near-field Indoor Channel Model for THz Bands Based on Surface Scattering Characteristics

Terahertz (THz) communication and extremely large-scale MIMO (XL-MIMO) are essential for achieving ultra-high data rates in future 6G systems. However, at sub-millimeter wavelengths, typical indoor materials exhibit significant roughness that invalidates conventional ideal smooth surface assumptions, while massive array apertures introduce pronounced near-field effects and spatial non-stationarity. To address these challenges, this paper proposes a hybrid near-field channel model utilizing surface scattering characteristics based on distinct measurement campaigns. First, based on typical indoor materials scattering measurements across the 260-400 GHz band, an improved Beckmann-Kirchhoff (B-K) model is developed to accurately characterize surface roughness and diffuse scattering behavior. The model independently analyzes single-bounce (SB) and multi-bounce (MB) clusters by applying deterministic rough surface scattering theory and geometry-statistical approach, respectively. Then, using near-field spatial non-stationarity measurements from a 630-element virtual array in the 330-360 GHz band, a Dual-Gaussian Mixture Model (DMM) and a Negative Binomial (NB) distribution are adopted to describe the lengths and the number of spatial visibility regions (VRs), respectively. Additionally, a Weibull distribution is employed to model the intra-region power fluctuations. Finally, comprehensive XL-MIMO channel evaluations within the same band demonstrate that the proposed model aligns closely with measured results in terms of the spatial cross-correlation function (SCCF), frequency cross-correlation function (FCF), and channel capacity. By reproducing the spatial sparsity of THz band, the proposed model overcomes the limitation of conventional standard models, such as 3GPP 38.901 and WINNER II, in significantly overestimating channel capacity.

RFDT-Channel: RGB-LiDAR-Based RF Digital Twin Scene Construction for 28 GHz Indoor Ray-Tracing Channel Simulation

Real-scene indoor millimeter-wave simulation requires efficient modeling of radio frequency (RF)-computable geometry and electromagnetic material properties. To address the low efficiency of manual scene modeling, the limited RF adaptability of visually reconstructed meshes, and the lack of material binding in 28 GHz ray-tracing simulation, RFDT-Channel is developed as an RF digital twin scene construction workflow based on red-green-blue (RGB) images and light detection and ranging (LiDAR) point clouds. Indoor videos and point clouds are collected by a Jetson Orin platform with LiDAR and GMSL cameras. An initial triangular mesh is generated through COLMAP, 3D Gaussian Splatting, and SuGaR. The LiDAR point cloud then provides geometric and scale references for RF-oriented regularization in Blender, including alignment, wall solidification, door/window opening construction, and topology repair. OpenScene semantic segmentation maps major indoor structures to concrete, glass, wood, and metal materials, and Sionna RT performs 28 GHz ray tracing. Under a fixed transmitter-receiver deployment, the generated channel impulse response (CIR), channel frequency response (CFR), and Radio Map results show that material binding mainly changes weak reflection, transmission, and scattering paths, reducing the number of effective paths from about 742 to about 52 while keeping the dominant path amplitude nearly unchanged.

A Measurement-Based Parameterization of Physics Reflection Models for Terahertz Communication

The accurate modeling of reflection coefficients is pivotal for developing reliable channel models in emerging terahertz (THz) communications. This study establishes a 300$\sim$400 GHz channel measurement platform to measure the reflection coefficients of various materials. Based on the analysis of measured data, we propose the single-layer interference with an extended-parameterized Lorentz/Drude (SLI-EPLD) reflection coefficient model. In this model, a sub-band modeling strategy is adopted to characterize the variation of reflection coefficients with frequency, while a parameterized mapping approach is employed to ensure the stability of model parameters. Furthermore, the weighted sub-band fitting for trend regression (WF-TREND) algorithm is introduced to achieve precise sub-band parameter fitting. Validation results demonstrate superior performance to existing models across multiple materials. The reflection coefficient model established in this work serves as a critical foundation for channel modeling in 300$\sim$400 GHz for high-THz communication.

CAT-MoEformer: Context-Aware Temporal MoE Transformer for Beam Prediction

This paper proposes CAT-MoEformer, a context-aware transformer with scene-conditioned mixture-of-experts (MoE) feed-forward networks, for proactive mmWave beam prediction from compressed uplink pilot observations. The spatial encoder comprises a three-layer asymmetric convolutional network followed by a squeeze-and-excitation recalibration block, which extracts frequency-beam correlation features from pilot tensors without explicit channel reconstruction. A truncated pretrained GPT-2 backbone models the temporal evolution of beam sequences, with the feed-forward networks in the upper three transformer layers replaced by scene-conditioned MoE-FFN modules. A lightweight gating network maps the scenario label and normalized user equipment speed to expert mixing weights, conditioning the routing decision on physical propagation descriptors rather than on latent hidden states. This design yields interpretable expert assignments and eliminates the load imbalance associated with token-level routing. To prevent expert collapse under soft routing, a three-stage training strategy is introduced: hard expert assignment in the first stage establishes scene-specific specialization, isolated gating network training in the second stage aligns the soft routing distribution with the hard partition, and top-1 hard inference in the third stage fine-tunes the model under deterministic single-expert activation to maximize scene-specific precision. Simulation results on 3GPP TR 38.901 Urban Macro channel simulations with $64{,}000$ user samples demonstrate that CAT-MoEformer achieves a Top-1 beam prediction accuracy of $94.88\%$ and a beam switching instant accuracy of $80.62\%$, representing gains of $2.33\%$ and $9.55\%$ respectively over a CNN+GPT-2 baseline, with an inference latency of $0.52$~ms.

Spherical Antenna Arrays for Future Communications: Principles, Applications, and Research Directions

With the development of 6G technologies, traditional uniform linear arrays (ULAs) and uniform planar arrays (UPAs) can hardly meet the demands of three-dimensional (3D) full-space coverage and high angular resolution. Spherical antenna arrays (SAAs), with elements uniformly distributed on a spherical surface, provide an effective solution. This article analyzes the issues of traditional arrays, summarizes the advantages and typical structures of SAAs, discusses their potential application scenarios, and verifies their superiority over UPAs via a case study. Finally, key technical challenges and corresponding research directions of SAAs are identified, providing a reference for their research and application in future wireless communications.

A BEV-Fusion Based Framework for Sequential Multi-Modal Beam Prediction in mmWave Systems

Beam prediction is critical for reducing beam-training overhead in millimeter-wave (mmWave) systems, especially in high-mobility vehicular scenarios. This paper presents a BEV-Fusion based framework that unifies camera, LiDAR, radar, and GPS modalities in a shared bird's-eye-view (BEV) representation for spatially consistent multi-modal fusion. Unlike priorapproaches that fuse globally pooled one-dimensional features, the proposed method performs fusion in BEV space to preservecross-modal geometric structure and visual semantic density. A learned camera-to-BEV module based on cross-attention is adopted to generate BEV-aligned visual features without relying on precise camera calibration, and a temporal transformer is used to aggregate five-step sequential observations for motion-aware beam prediction. Experiments on the DeepSense 6G benchmark show that BEV-Fusion achieves approximately 87% distance- based accuracy (DBA) on scenarios 32, 33 and 34, outperforming the TransFuser baseline. These results indicate that BEV-space fusion provides an effective spatial abstraction for sensing-assisted beam prediction.

Spherical Antenna Arrays: Principles, Applications, and Research Directions

With the development of 6G technologies, traditional uniform linear arrays (ULAs) and uniform planar arrays (UPAs) can hardly meet the demands of three-dimensional (3D) full-space coverage and high angular resolution. Spherical antenna arrays (SAAs), with elements uniformly distributed on a spherical surface, provide an effective solution. This article analyzes the issues of traditional arrays, summarizes the advantages and typical structures of SAAs, discusses their potential application scenarios, and verifies their superiority over UPAs via a case study. Finally, key technical challenges and corresponding research directions of SAAs are identified, providing a reference for their research and application in future wireless communications.

Ground Reflection-Aided TomoSAR Imaging with 5G NR Signals

Tomographic synthetic aperture radar (TomoSAR) enables three-dimensional imaging by resolving targets along the elevation dimension, which is essential for environment reconstruction and infrastructure monitoring. A critical challenge in TomoSAR is the severe multipath propagation that causes ghost targets, range offsets, and elevation ambiguities. To address this, this paper proposes an enhanced Newtonized orthogonal matching pursuit (NOMP) algorithm to extract the delay, Doppler, and complex amplitude parameters of each propagation path, effectively separating line-of-sight (LoS) and multipath components prior to TomoSAR processing. Additionally, a height fusion strategy combining TomoSAR estimates with LoS-ground reflection delay-based inversion improves elevation accuracy. Simulation results demonstrate that the proposed method achieves improved positioning and elevation accuracy while effectively suppressing multipath-induced artifacts.

Subspace Fusion Sensing for Cooperative ISAC

This paper proposes a subspace fusion sensing algorithm for cooperative integrated sensing and communication. First, we stack the received signals from access points (APs) into a third-order tensor and construct the equivalent virtual antenna (EVA) array via tensor unfolding. Then, a data association-free subspace-based fusion sensing algorithm is developed utilizing the EVA arrays from distributed APs. A derivation of Cramer-Rao lower bound (CRLB) is also presented. Finally, simulation results validate the effectiveness of the proposed algorithm compared to traditional techniques.

Theoretical and Empirical Study of Spatial Power Focusing Effect for Sparse Arrays at Terahertz Band

This work investigates the spatial power focusing effect for large-scale sparse arrays at terahertz (THz) band, combining theoretical analysis with experimental validation. Specifically, based on a Green's function channel model, we analyze the power distribution along the $z$-axis, deriving a closed-form expression to characterize the focusing effect. Furthermore, the factors influencing the focusing effect, including phase noise and positional deviations, are theoretically analyzed and numerically simulated. Finally, a 300 GHz measurement platform based on a vector network analyzer (VNA) is constructed for experimental validation. The measurement results demonstrate close consistence with theoretical simulation results, confirming the spatial power focusing effect for sparse arrays.